*Up to $250 off. Some items excluded. See details.
Line 6 Catalyst CX60 60-Watt Dual-Channel 1x12 Combo Amplifier
Catalyst CX 60 is a 60-watt dual-channel 1x12 combo amplifier that performs like a traditional amp while providing the increased versatility of a modern amp. The CX 60 features 12 Amp Voicings derived from the award-winning Helix® amp and effects processor—ranging from pristine clean to modern high-gain—and each Amp Voicing is matched with a custom Boost type. There are also 24 HX®-quality effects spanning four effects categories. Additional features include sturdy construction, a Tap/Tuner button, an XLR line output, an effects loop, a Power Amp input for using Catalyst CX as a powered speaker, MIDI functionality, a 4-channel USB recording interface, and power output options. The free Catalyst Edit app for desktop and mobile devices provides deep editing capabilities.
FEATURES
12 Amp Voicings
Select one of 12 Amp Voicings ranging from pristine clean to modern high-gain, derived from the Helix amp and effects processor.
Traditional Controls Plus
Catalyst CX amps feature familiar Volume, Gain, Tone, and Reverb controls—with numerous effect and other options available just “under the hood.”
Dedicated Boost
Each Amp Voicing is matched with an optimal Boost type. Use the Boost control to adjust the amount, and the Boost button to switch the circuit in and out.
Onboard Effects
Select up to two of 24 Reverb, Delay, Modulation, and Pitch effects derived from Helix.
Tempo/Tuner
Tap in the tempo when using time-based effects such as delay and tremolo. Press and momentarily hold the button to access the chromatic tuner.
Optional Footswitch
Connect an optional LFS2 footswitch to toggle between channels and turn effects on and off remotely. The roadworthy metal LFS2 comes with a cable. (Sold separately)
Professional Connectivity
Connect Catalyst CX to professional P.A. or recording devices using the XLR line output (with Ground Lift switch).
Effects Loop
Insert external effects and other devices into your signal chain using the Effects Loop.
Power Amp IN
Use Catalyst CX as a powered speaker by bypassing the preamp. Perfect for use with amp modelers and simulators.
Output Power
Provides half power, 0.5 watts, and speaker Mute options for reduced volume with minimal tone variation.
USB
Use this to connect to the Catalyst Edit app (Mac®, PC, iOS®, Android™) and to the onboard audio interface, which provides 4 channels (4in/4out) at 24-bit, 44.1kHz or 48kHz.
MIDI
Catalyst 60 supports MIDI over USB-B.
PANEL CONTROLS
CHANNEL SELECTThere are two channels that may be configured individually and their settings saved. Press the CH A or CH B button to select a channel. Press the Manual button to enter Manual mode, which is independent of the two channels, and use the controls as you would on a traditional amp. |
BASS, MID, TREBLEThese controls operate just like those on a traditional amp. Settings are saved with individual presets, or apply globally when in Manual mode. |
AMP SELECTOR & LED RINGThere are two Amp Groups, each comprising six Line 6 Amp Voicings—and pressing the CH A and CH B buttons simultaneously switches between them. Turn the Selector to load an Amp Voicing within the currently selected Group. |
PRESENCEBoosts specific upper-midrange and treble frequencies to make your tone more pronounced and “present.” |
BOOST SWITCH & KNOBPress the button to enable/disable the Boost feature. Use the Boost knob to adjust the boost level. |
EFFECT CONTROLSPress the buttons to engage either or both of the effects. Use the Effect 1 and Effect 2 knobs to increase the amount of effect added to your tone. Various Delay, Modulation, Pitch/Filter, and Reverb effects may be assigned to these controls. |
GAINIncreases overdrive, distortion, and level. |
TAP/TUNER BUTTONTap in time with the music to set the tempo of delay and modulation effects. Press and hold to engage the Tuner. |
SPECIFICATIONS
Amplifier Wattage | 60 Watts RMS |
Mono/Stereo | Mono |
Power Damping | 30W, 0.5W, mute/recording |
Speaker Size | 12" (30.48 cm) |
Stereo Headphone Out | 1/4" |
Amps | 12 |
Cab Models | 3 (DI Out via editor) |
Channels | 2 |
Presets | 12 |
Banks | 6 |
Controls | Boost, Gain, EQ (3 band), Presence, Ch. Volume, Effect 1, Effect 2, Master |
EQ | 3 Band + Presence |
Effects Loop | 1/4" Input & Output |
Power Amp In | 1/4" |
USB | Type B |
Direct Out | XLR with ground lift |
Aux In | 3.5mm Stereo |
Height (in/mm) | 17.5/444 |
Width (in/mm) | 19.9/505 |
Depth (in/mm) | 10.2/260 |
Weight (lbs/kg) | 25.9/11.8 |
SHIPPING INFO
Shipping cost is based on weight. Most orders over $99 qualify for free standard shipping within the lower 48 United States.
To see available shipping options and rates just add product(s) to your cart and use the Shipping Calculator. See shipping policy.
We can ship most products internationally. Consult our Global page for further details.
Need it fast? Upgrade to an expedited shipping method at checkout (charges apply). If you need it tomorrow and the shipping deadline has passed, contact us immediately, as we may be able to accommodate you.
EASY 30-DAY RETURNS
We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.